Serving Horizon City, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

GE Washer Repair in Horizon City, TX

Independent repair companies near Horizon City that work on GE washers, with companies that mention GE listed first.

Need GE washer repair near Horizon City?
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓10 companies listed for Horizon City✓Independent, not a manufacturer✓Public ratings & distances

If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Horizon City list starts with companies that name GE, followed by other appliance repair companies that work on washers.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.

Independent GE Washer Technicians, Horizon City TX

We found 27 appliance repair companies within 30 miles of Horizon City. 1 of them are based in Horizon City itself, and other nearby bases include El Paso (24), Socorro (1), and Chaparral (1). Nearest on the list: Geko appliances repairs, around 3.0 miles out. No company within 90 miles of Horizon City mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.2 stars across 24 businesses.

Washer & Dryer Repair
AAA Affordable Appliance Repair
11745 Scott Simpson Dr, El Paso, TX 79936
7.6 mi from Horizon City
★★★★½ 4.5 (784 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
SoBellas Home Services
125 Graphite Dr D, El Paso, TX 79932
25.7 mi from Horizon City
★★★★★ 4.8 (2,773 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
8401 Gateway Blvd W, El Paso, TX 79925
12.9 mi from Horizon City
★★★★½ 4.3 (719 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Economy Appliances
5242 Rushing Rd, El Paso, TX 79924
19.6 mi from Horizon City
★★★★½ 4.7 (96 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
TOMS APPLIANCE
458 El Camino Dr, El Paso, TX 79912
23.8 mi from Horizon City
★★★★½ 4.5 (126 reviews)
Mentions washersSaturday hours
Appliance Repair
Geko appliances repairs
14417 Colina Corona Dr, Horizon City, TX 79928
3.0 mi from Horizon City
★★★★★ 4.8 (16 reviews)
Saturday hours
Appliance Repair
Max Quality Appliance
10845 N Loop Dr, Socorro, TX 79927
4.9 mi from Horizon City
★★★★½ 4.7 (131 reviews)
Saturday hours
Appliance Repair
Gorman Distributing Co., Inc.
1701 Texas Ave, El Paso, TX 79901
17.7 mi from Horizon City
★★★★½ 4.6 (37 reviews)
Appliance Repair
Perez Appliance Repair
2305 Tierra Blanda Dr, El Paso, TX 79938
8.1 mi from Horizon City
★★★★½ 4.4 (30 reviews)
Saturday hours
Appliance Repair
Abominable LLC
103 Heavens Way, Chaparral, NM 88081
24.2 mi from Horizon City
★★★★★ 4.9 (32 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Horizon City repair companies in numbers
Distance to the three closest (mi)3.0, 4.9, 7.6
Appliance repair companies in range (30 mi)27
Mention washer work5
Mention GE0
Open on Saturdays (per listing)16
Rated 4.5 stars or higher (10+ reviews)11

Closest matches for Horizon City: AAA Affordable Appliance Repair (7.6 miles away, based in El Paso, 4.5 stars from 784 reviews, lists Saturday hours); SoBellas Home Services (25.7 miles away, based in El Paso, 4.8 stars from 2,773 reviews, lists Saturday hours); Sears Appliance Repair (12.9 miles away, based in El Paso, 4.3 stars from 719 reviews, lists Saturday hours); Economy Appliances (19.6 miles away, based in El Paso, 4.7 stars from 96 reviews, lists Saturday hours).

⚡ Get connected with a GE washer technician near Horizon City
☎(866) 293-4411

GE Washer Lines Technicians Work On

GE Profile UltraFast ComboAn all-in-one ventless washer and dryer that moves a load from washing to drying in the same drum on a standard 120V outlet.
GE Profile top load seriesGE Profile top load washers offered in both agitator and impeller versions with adaptive Smarter Wash controls.

How GE Washers Are Built

On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights

Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting

Common GE Washer Problems

  • Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
  • Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain

GE Washer Error Codes

CodeWhat it means
H2O SUPPLY / IEWater is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator
LIdThe cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
UEThe load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator

Signs Your GE Washer Needs a Technician

  • Musty or mildew smell from the drum or door seal
  • Water on the floor under or in front of the washer
  • An error code on the display

Inside a Washer Repair Visit

Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Care GE Recommends for Its Washers

Brand guides: GE Washer Not Draining or Spinning: What to Check.

GE Washer Repair Cost Ranges

Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

  • How old the washer is
  • Any error code shown on the display
  • Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller

Around Horizon City

Most washer calls in Horizon City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

Questions to Ask a Horizon City Washer Technician

  • What guarantee do you give on parts and labor?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

GE Washer Repair FAQs: Horizon City, TX

How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Other Washer Repair in Horizon City

GE Washer Repair in Nearby Cities

Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Horizon City technician bring the right parts.

Call to reach an independent GE washer tech
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech