A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Brushy Creek TX
Within 30 miles of Brushy Creek there are 40 appliance repair companies in our data. Other nearby bases include Round Rock (16), Austin (14), and Cedar Park (6). Distances run up to about 7 miles. Nearest on the list: Munko Appliance Repair, around 1.1 miles out. No company within 90 miles of Brushy Creek mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 37 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 29 |
|---|---|
| Listing Saturday hours | 45 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention washer work | 10 |
| Three nearest companies, miles away | 1.1, 1.4, 2.0 |
| Mention GE | 0 |
At the top of the Brushy Creek list: ExpressFix Appliance Repair (1.4 miles away, based in Round Rock, 4.8 stars from 48 reviews, lists Saturday hours); UltraFix Appliance Repair (5.3 miles away, based in Austin, 4.7 stars from 130 reviews, lists Saturday hours); Excellence Appliance Repair (5.9 miles away, based in Leander, 4.8 stars from 1,261 reviews, lists Saturday hours); PMA Home Experts (5.5 miles away, based in Round Rock, 5.0 stars from 27 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines and Features
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Brushy Creek
Owner Care for GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Around Brushy Creek
Most washer calls in Brushy Creek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Brushy Creek Washer Technician
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Brushy Creek, TX
Is this GE customer service?
Is my GE washer worth repairing?
Why won't my washer spin?
How do I find a technician who knows GE washers?
More Washing Machine Repair in Brushy Creek, TX
GE Washer Repair Near Brushy Creek
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.