Most GE washer repairs in Seven Oaks involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Seven Oaks list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Seven Oaks
We found 28 appliance repair companies within 30 miles of Seven Oaks. The rest are spread across Columbia (16), Lexington (3), and West Columbia (2). Distances run up to about 30 miles. Of those, 1 mentions GE by name. The closest is Columbia Appliance Repair Services, about 1.1 miles away. The 24 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 28 |
|---|---|
| Mention GE | 1 |
| Listing Saturday hours | 16 |
| Distance to the three closest (mi) | 1.1, 2.1, 2.7 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Mention washer work | 11 |
First up for Seven Oaks: Sloan Appliance Service Inc. (7.3 miles away, based in Cayce, 4.7 stars from 2,353 reviews); Appliance Professional (5.0 miles away, based in Lexington, 4.8 stars from 1,369 reviews, lists Saturday hours); Quick Appliance repair llc (2.1 miles away, based in Columbia, 5.0 stars from 241 reviews, lists Saturday hours); Expo Appliance Service (7.3 miles away, based in West Columbia, 4.9 stars from 309 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Seven Oaks
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Seven Oaks, SC
Most washer calls in Seven Oaks come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Before You Book in Seven Oaks
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Seven Oaks, SC
Why won't my washer spin?
Which Seven Oaks technicians work on GE?
Where is the water under my washer coming from?
Related Repair Pages for Seven Oaks
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.