A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Urbana
Within 60 miles of Urbana there are 40 appliance repair companies in our data. The rest are spread across Dayton (14), Columbus (7), and Beavercreek (3). The farthest listed company is about 37 miles out. None of the repair companies near Urbana name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Carmichael Appliances, about 12.1 miles away. The 34 rated companies in range average 4.1 stars. Because the nearest shops are farther out, ask each company whether Urbana is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (60 mi) | 60 |
|---|---|
| Distance to the three closest (mi) | 12.1, 12.2, 24.2 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 36 |
| Name washers or washing machines in their listing | 13 |
| With 4.5+ stars and at least 10 reviews | 16 |
The leading options for Urbana are New Life Appliance Repair LLC (33.2 miles away, based in Delaware, 5.0 stars from 187 reviews); Central Ohio Appliance Repair Inc. (34.7 miles away, based in Columbus, 4.5 stars from 963 reviews, lists Saturday hours); Sears Appliance Repair (12.2 miles away, based in Springfield, 4.4 stars from 96 reviews, lists Saturday hours); Sears Appliance Repair (33.1 miles away, based in Dublin, 4.4 stars from 185 reviews, lists Saturday hours).
Know Your GE Washer
What Makes GE Washer Repairs Different
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Urbana
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Laundry Notes for Urbana, OH
Most washer calls in Urbana come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Questions to Ask a Urbana Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Urbana, OH
Do you work for GE?
How do I get rid of a washer mildew smell?
Where is the water under my washer coming from?
Which Urbana technicians work on GE?
Other Washer Repair in Urbana
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Urbana technician bring the right parts.