Most GE washer repairs in Concord involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Concord, with those that mention GE first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Concord
Within 30 miles of Concord there are 28 appliance repair companies in our data. 3 list an address in Concord, and the rest are spread across Manchester (8), Hooksett (2), and Bristol (2). The farthest listed company is about 30 miles out. No company within 90 miles of Concord mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Affiliated Appliance Services., about 3.4 miles away. Rated companies nearby average 4.3 stars across 27 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 8 |
|---|---|
| Repair companies inside 30 miles | 28 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 18 |
| Three nearest companies, miles away | 3.4, 3.6, 4.1 |
| Listing Saturday hours | 12 |
At the top of the Concord list: Sears Appliance Repair (3.6 miles away, 4.6 stars from 280 reviews, lists Saturday hours); Affiliated Appliance Services. (3.4 miles away, 4.6 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (20.1 miles away, based in Manchester, 4.6 stars from 244 reviews, lists Saturday hours); Appliance Services, LLC (28.3 miles away, based in Epping, 4.9 stars from 175 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Concord
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Around Concord
Most washer calls in Concord come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
In New Hampshire, you can check a license with the NH Office of Professional Licensure and Certification License Lookup or report a problem to the New Hampshire Department of Justice, Consumer Protection & Antitrust Bureau.
Before You Book in Concord
- What guarantee do you give on parts and labor?
- How often do you repair GE washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Concord, NH
Why does my front-load washer smell?
What stops a washer from spinning?
Where is the water under my washer coming from?
More Washing Machine Repair in Concord, NH
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.