Most GE washer repairs in Cleveland involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Cleveland MS
We found 10 appliance repair companies within 60 miles of Cleveland. The rest are spread across Clarksdale (2), Greenwood (2), and Drew (1). Distances run up to about 59 miles. Devoted Appliance Repair Drew is the nearest, roughly 12.4 miles from Cleveland. None of the repair companies near Cleveland name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.3 stars across 10 businesses. Because the nearest shops are farther out, ask each company whether Cleveland is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 5 |
|---|---|
| Mention GE | 0 |
| Companies within 60 miles | 10 |
| Name washers or washing machines in their listing | 4 |
| Rated 4.5 stars or higher (10+ reviews) | 0 |
| Three nearest companies, miles away | 12.4, 20.6, 29.4 |
The leading options for Cleveland are Sears Appliance Repair (31.2 miles away, based in Greenville, 5.0 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (31.6 miles away, based in Clarksdale, 4.3 stars from 60 reviews, lists Saturday hours); Sears Appliance Repair (33.9 miles away, based in Greenwood, 3.9 stars from 7 reviews, lists Saturday hours); Sears Appliance Repair (52.0 miles away, based in Grenada, 3.8 stars from 23 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Error Codes
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Cleveland
Most washer calls in Cleveland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.
Hiring a Washer Repair Company in Cleveland
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair GE washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Cleveland, MS
How do I find a technician who knows GE washers?
Why won't my washer spin?
Is my GE washer worth repairing?
Do you work for GE?
More Washing Machine Repair in Cleveland, MS
GE Washer Repair Near Cleveland
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.