If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Raymore list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Raymore MO
40 repair companies serve Raymore from within 30 miles. 1 of them are based in Raymore itself, and other nearby bases include Overland Park (9), Kansas City (8), and Lee's Summit (6). The farthest listed company is about 22 miles out. The closest is ESR Heating, Cooling & Refrigeration, about 0.5 miles away. None of the repair companies near Raymore name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 36 rated companies, the average public rating is 4.6 stars.
Companies are shown by relevance and distance from Raymore. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Distance to the three closest (mi) | 0.5, 4.4, 7.4 |
| Mention washer work | 5 |
| Repair companies inside 30 miles | 53 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Open on Saturdays (per listing) | 33 |
At the top of the Raymore list: Mr. Appliance of Lee's Summit and Raymore (11.9 miles away, based in Lee's Summit, 4.8 stars from 214 reviews); Appliance Shark (15.5 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); Arrowhead Appliance Repair (16.6 miles away, based in Independence, 4.8 stars from 234 reviews, lists Saturday hours); Sears Appliance Repair (17.0 miles away, based in Independence, 4.5 stars from 909 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
GE Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Raymore Washer Call
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Any error code shown on the display
What Raymore Owners Should Know
Most washer calls in Raymore come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Washer Repair Company in Raymore
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Raymore, MO
What should I do about a GE error code?
Why won't my washer spin?
Which Raymore technicians work on GE?
Why is my washer leaking?
Other Washer Repair in Raymore
GE Washer Repair Near Raymore
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.