Serving Milford, Michigan and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

GE Washer Repair in Milford, MI

A local list of independent GE washing machine technicians for Milford and the Oakland County area, plus a helpline that connects you with one.

GE washer acting up in Milford?
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓10 companies listed for Milford✓Independent, not a manufacturer✓Public ratings & distances

GE owners in Milford usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.

Who Works on GE Washers Near Milford

40 repair companies serve Milford from within 30 miles. The rest are spread across Livonia (11), Waterford Township (6), and Commerce Township (2). Michigan Appliance Repair is the nearest, roughly 7.0 miles from Milford. No company within 90 miles of Milford mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.4 stars across 39 businesses.

Washer & Dryer Repair
Michigan Appliance Repair
11750 Highland Rd Ste 700, Hartland, MI 48353
7.0 mi from Milford
★★★★★ 4.8 (863 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Oakland County
33150 Schoolcraft, Livonia, MI 48150
18.3 mi from Milford
★★★★★ 4.8 (1,216 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Greater Livingston County
748 W Grand River Ave Ste H, Brighton, MI 48116
9.9 mi from Milford
★★★★★ 4.8 (957 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7374 Highland Rd #4789, Waterford Township, MI 48327
10.0 mi from Milford
★★★★★ 4.8 (123 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
5100 Dixie Hwy, Waterford Township, MI 48329
13.1 mi from Milford
★★★★½ 4.5 (84 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Waterford
4568 W Walton Blvd Ste C, Waterford Township, MI 48329
13.4 mi from Milford
★★★★½ 4.7 (348 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
27600 Novi Rd, Novi, MI 48377
9.3 mi from Milford
★★★★½ 4.6 (389 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4193 E Grand River Ave, Howell, MI 48843
13.7 mi from Milford
★★★★½ 4.4 (128 reviews)
Mentions washersSaturday hours
Appliance Repair
AAA Service Network
8636 Whitmore Lake Rd, Brighton, MI 48116
11.0 mi from Milford
★★★★★ 4.8 (3,174 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
12001 Sears Dr, Livonia, MI 48150
19.6 mi from Milford
★★★★½ 4.6 (149 reviews)
Mentions washersSaturday hours

Companies are shown by relevance and distance from Milford. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Washer repair near Milford at a glance
Repair companies inside 30 miles60
Open on Saturdays (per listing)38
Distance to the three closest (mi)7.0, 7.7, 8.2
Mention washer work18
With 4.5+ stars and at least 10 reviews24
Mention GE0

First up for Milford: Michigan Appliance Repair (7.0 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours); Mr. Appliance of Oakland County (18.3 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Mr. Appliance of Greater Livingston County (9.9 miles away, based in Brighton, 4.8 stars from 957 reviews, lists Saturday hours); Sears Appliance Repair (10.0 miles away, based in Waterford Township, 4.8 stars from 123 reviews, lists Saturday hours).

⚡ Get connected with a GE washer technician near Milford
☎(866) 293-4411

GE Washer Lines and Features

Water StationA built-in feature that dispenses water, with or without detergent, so stains can be pretreated inside the washer.
UltraFresh Vent System with OdorBlockA front load design that drains the gasket and spins the drum with the door closed to pull air through a vent and dry the tub after washing.

What Makes GE Washer Repairs Different

Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting

What GE Says to Check First

Reading a GE Washer Error Code

CodeWhat it means
FEWater has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator
dE / E2The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator
Po (or flashing Rinse light)The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain

Signs Your GE Washer Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Water left in the drum after the cycle
  • Musty or mildew smell from the drum or door seal

Inside a Washer Repair Visit

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Care GE Recommends for Its Washers

Brand guides: GE Washer Not Draining or Spinning: What to Check.

GE Washer Repair Cost Ranges

A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

  • How old the washer is
  • Any error code shown on the display
  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet

What Milford Owners Should Know

Most washer calls in Milford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

Questions to Ask a Milford Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • How often do you repair GE washers, and how quickly can you get parts?
  • If the washer is leaking, will you find where the water starts before quoting a part?

GE Washer Repair FAQs: Milford, MI

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Should I repair or replace my GE washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
What should I do about a GE error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged drain filter, a kinked hose or an unbalanced load. If the code returns, a technician can test the part the code points to.

Related Repair Pages for Milford

GE Washer Repair Near Milford

Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Milford technician bring the right parts.

One call to a GE washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech