If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Harper Woods list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Harper Woods
Within 30 miles of Harper Woods there are 40 appliance repair companies in our data. The rest are spread across Warren (5), Detroit (5), and Clinton Township (5). The farthest listed company is about 14 miles out. The closest is Sears Appliance Repair, about 2.0 miles away. None of the repair companies near Harper Woods name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 34 rated companies in range average 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 42 |
|---|---|
| Mention washer work | 16 |
| With 4.5+ stars and at least 10 reviews | 18 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 2.0, 2.1, 2.2 |
| Mention GE | 0 |
First up for Harper Woods: Detroit Appliance (6.2 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (7.7 miles away, based in Fraser, 4.6 stars from 1,181 reviews); Mr. Appliance of Macomb County (11.3 miles away, based in Mt Clemens, 4.8 stars from 245 reviews); A & E Appliance Repair, Parts & Service (4.1 miles away, based in Roseville, 4.6 stars from 1,415 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Harper Woods
Most washer calls in Harper Woods come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Before You Book in Harper Woods
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Harper Woods, MI
Where is the water under my washer coming from?
Do you work for GE?
Why does my front-load washer smell?
Why won't my washer spin?
Other Washer Repair in Harper Woods
GE Washer Repair Near Harper Woods
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.