Most GE washer repairs in Auburn Hills involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Auburn Hills list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Auburn Hills
Our data shows 40 appliance repair companies inside a 30-mile radius of Auburn Hills. 2 of them are based in Auburn Hills itself, and other nearby bases include Waterford Township (6), Madison Heights (4), and Royal Oak (3). No company within 90 miles of Auburn Hills mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Authorized Factory Service, about 1.0 miles away. Across 38 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 21 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 27 |
| Mention GE | 0 |
| Companies within 30 miles | 60 |
| Listing Saturday hours | 37 |
| Distance to the three closest (mi) | 1.0, 2.8, 3.2 |
Closest matches for Auburn Hills: Sears Appliance Repair (10.6 miles away, based in Shelby Township, 4.6 stars from 211 reviews, lists Saturday hours); Mr. Appliance of Waterford (6.9 miles away, based in Waterford Township, 4.7 stars from 348 reviews); Sears Appliance Repair (7.5 miles away, based in Waterford Township, 4.5 stars from 84 reviews, lists Saturday hours); Sears Appliance Repair (9.6 miles away, based in Waterford Township, 4.8 stars from 123 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- An error code on the display
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Auburn Hills, MI
Most washer calls in Auburn Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Auburn Hills
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair GE washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
GE Washer Repair FAQs: Auburn Hills, MI
Is my GE washer worth repairing?
Which Auburn Hills technicians work on GE?
What stops a washer from spinning?
Why is my washer leaking?
Other Washer Repair in Auburn Hills
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.