Most GE washer repairs in Chillum involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Chillum, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Chillum
Our data shows 40 appliance repair companies inside a 30-mile radius of Chillum. The rest are spread across Washington (20), Silver Spring (7), and Hyattsville (3). The farthest listed company is about 5 miles out. No company within 30 miles of Chillum names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Sears Appliance Repair, around 0.3 miles out. The 34 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Chillum. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 1 |
|---|---|
| Distance to the three closest (mi) | 0.3, 1.0, 1.1 |
| Listing Saturday hours | 39 |
| Name washers or washing machines in their listing | 4 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
The leading options for Chillum are District-Columbia Hotpoint Rpr (5.7 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Sears Appliance Repair (0.3 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); Sears Appliance Repair (5.3 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours); L and Sons Appliance Repairs LLC (5.1 miles away, based in Washington, 4.8 stars from 191 reviews).
GE Washer Lines and Features
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Care GE Recommends for Its Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Chillum
Most washer calls in Chillum come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Chillum
- How often do you repair GE washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: Chillum, MD
Why does my front-load washer smell?
What should I do about a GE error code?
Why is my washer leaking?
Should I repair or replace my GE washer?
Other Washer Repair in Chillum
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.