GE owners in Boone usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Boone, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Who Works on GE Washers Near Boone
34 repair companies serve Boone from within 60 miles. Other nearby bases include Des Moines (11), Urbandale (5), and Ankeny (2). The farthest listed company is about 59 miles out. Nearest on the list: Ken's Appliance & Services LLC, around 13.6 miles out. 1 lists GE specifically. Across 32 rated companies, the average public rating is 4.5 stars. Boone is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 60 miles | 34 |
|---|---|
| Open on Saturdays (per listing) | 26 |
| Mention washer work | 9 |
| Distance to the three closest (mi) | 13.6, 26.4, 27.6 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Mention GE | 1 |
First up for Boone: Westside Appliance Repair (30.6 miles away, based in Urbandale, 4.6 stars from 774 reviews); Ken's Appliance & Services LLC (13.6 miles away, based in Ames, 4.0 stars from 90 reviews, lists Saturday hours); Sears Appliance Repair (27.8 miles away, based in Webster City, 4.6 stars from 38 reviews, lists Saturday hours); Greens Appliance, Heating & Cooling (27.6 miles away, based in Grimes, 4.9 stars from 4,448 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Error Codes
| Code | What it means |
|---|---|
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Boone
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Boone
Most washer calls in Boone come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Hiring a Washer Repair Company in Boone
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Washer Repair FAQs: Boone, IA
Why does my front-load washer smell?
Is my GE washer worth repairing?
Why is my washer leaking?
Do you work for GE?
Related Repair Pages for Boone
GE Washer Repair Near Boone
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Boone technician bring the right parts.