A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Loganville list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Loganville GA
We found 40 appliance repair companies within 30 miles of Loganville. 7 of them are based in Loganville itself, and other nearby bases include Lawrenceville (11), Snellville (6), and Dacula (4). The farthest listed company is about 13 miles out. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Allstar Appliance Sales & Service LLC is the nearest, roughly 0.2 miles from Loganville. The 33 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Loganville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 26 |
|---|---|
| Three nearest companies, miles away | 0.2, 0.7, 3.3 |
| Open on Saturdays (per listing) | 43 |
| Mention GE | 0 |
| Mention washer work | 14 |
| Repair companies inside 30 miles | 60 |
First up for Loganville: Ge Appliance Repair Macon (70.4 miles away, based in Macon, 2.8 stars from 12 reviews, lists Saturday hours); DOCTOR SERVICE APPLIANCES LLC (9.5 miles away, based in Snellville, 5.0 stars from 269 reviews, lists Saturday hours); Atlanta Appliance Services (3.3 miles away, 4.9 stars from 485 reviews, lists Saturday hours); Grayson Appliance Repair HQ (4.8 miles away, based in Grayson, 4.8 stars from 62 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
What Gets Fixed on a Loganville Washer Call
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Loganville, GA
Most washer calls in Loganville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Hiring a Washer Repair Company in Loganville
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Loganville, GA
Do you work for GE?
How do I find a technician who knows GE washers?
Why does my front-load washer smell?
Related Repair Pages for Loganville
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.