GE owners in Lakeview usually want two things from a repair company: experience with the brand and quick access to parts. The Lakeview list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Lakeview GA
25 repair companies serve Lakeview from within 30 miles. The rest are spread across Chattanooga (9), Dalton (6), and Cleveland (2). The farthest listed company is about 27 miles out. Sears Appliance Repair is the nearest, roughly 1.7 miles from Lakeview. None of the repair companies near Lakeview name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 24 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Name washers or washing machines in their listing | 9 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Distance to the three closest (mi) | 1.7, 2.2, 2.7 |
| Appliance repair companies in range (30 mi) | 25 |
| Listing Saturday hours | 15 |
At the top of the Lakeview list: Mr. Appliance of Chattanooga (6.8 miles away, based in Chattanooga, 4.7 stars from 1,103 reviews, lists Saturday hours); Masters Appliance Heating & Air (4.2 miles away, based in Chattanooga, 4.8 stars from 149 reviews); Expert Services Appliance Heating & Air LLC (14.2 miles away, based in Collegedale, 4.7 stars from 463 reviews, lists Saturday hours); Sears Appliance Repair (1.7 miles away, based in Fort Oglethorpe, 4.4 stars from 136 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Keeping a GE Washer Running
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Around Lakeview
Most washer calls in Lakeview come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Questions to Ask a Lakeview Washer Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Lakeview, GA
How do I find a technician who knows GE washers?
Why does my GE washer show an error code?
Is my GE washer worth repairing?
Related Repair Pages for Lakeview
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.