A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Tamarac list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Tamarac
40 repair companies serve Tamarac from within 30 miles. 9 list an address in Tamarac, and other nearby bases include Sunrise (9), Coral Springs (9), and Margate (4). The farthest listed company is about 4 miles out. No company within 90 miles of Tamarac mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. APPLIANCE SERVICE SOLUTIONS, CORP is the nearest, roughly 1.0 miles from Tamarac. Rated companies nearby average 4.5 stars across 32 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 8 |
|---|---|
| Mention GE | 0 |
| Distance to the three closest (mi) | 1.0, 1.0, 1.1 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Listing Saturday hours | 41 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Tamarac list: Sears Appliance Repair (2.6 miles away, based in Coral Springs, 4.6 stars from 129 reviews, lists Saturday hours); Appliances N' Things (3.3 miles away, 4.7 stars from 174 reviews, lists Saturday hours); Maor Washer N' Dryer Repair (2.2 miles away, 4.8 stars from 6 reviews, lists Saturday hours); Shine Sunrise Appliance Repair (2.8 miles away, based in Sunrise, 4.6 stars from 10 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
What Gets Fixed on a Tamarac Washer Call
Keeping a GE Washer Running
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Tamarac
Most washer calls in Tamarac come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
How to Choose a Washing Machine Technician Near Tamarac
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Tamarac, FL
Why won't my washer spin?
How do I get rid of a washer mildew smell?
Which Tamarac technicians work on GE?
Where is the water under my washer coming from?
Other Washer Repair in Tamarac
GE Washer Repair Near Tamarac
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Tamarac technician bring the right parts.