Most GE washer repairs in Fleming Island involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Fleming Island, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Fleming Island
Within 30 miles of Fleming Island there are 40 appliance repair companies in our data. The rest are spread across Jacksonville (24), Orange Park (11), and Green Cove Springs (3). Nearest on the list: NOVA FORMULAS LLC, around 4.3 miles out. No company within 90 miles of Fleming Island mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 36 rated companies, the average public rating is 4.7 stars.
Companies are shown by relevance and distance from Fleming Island. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Listing Saturday hours | 37 |
| Mention washer work | 15 |
| Three nearest companies, miles away | 4.3, 4.5, 4.7 |
| With 4.5+ stars and at least 10 reviews | 15 |
| Mention GE | 0 |
The leading options for Fleming Island are Hartman's Appliance Repair (15.4 miles away, based in Jacksonville, 4.8 stars from 598 reviews, lists Saturday hours); A1action refrigeration and appliance repair (11.3 miles away, based in Jacksonville, 4.8 stars from 203 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Orange Park, 4.4 stars from 555 reviews, lists Saturday hours); Appliance Repair Jax (11.6 miles away, based in Jacksonville, 5.0 stars from 129 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Common GE Washer Problems
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Fleming Island
Most washer calls in Fleming Island come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Hiring a Washer Repair Company in Fleming Island
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Fleming Island, FL
What stops a washer from spinning?
What should I do about a GE error code?
Should I repair or replace my GE washer?
Related Repair Pages for Fleming Island
GE Washer Repair Near Fleming Island
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Fleming Island technician bring the right parts.