If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Oroville list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
GE Washer Repair Near Oroville
Our data shows 40 appliance repair companies inside a 60-mile radius of Oroville. 3 list an address in Oroville, and the rest are spread across Auburn (10), Rocklin (8), and Chico (4). Distances run up to about 51 miles. None of the repair companies near Oroville name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Pye's Appliance Services is the nearest, roughly 0.4 miles from Oroville. Across 29 rated companies, the average public rating is 4.4 stars. Oroville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 40 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Repair companies inside 60 miles | 60 |
| Mention washer work | 15 |
| Mention GE | 0 |
| Distance to the three closest (mi) | 0.4, 1.1, 4.1 |
Closest matches for Oroville: A-1 Appliance (1.1 miles away, 4.7 stars from 193 reviews, lists Saturday hours); Sears Appliance Repair (20.3 miles away, based in Chico, 4.4 stars from 185 reviews, lists Saturday hours); Northern Valley Appliance Services- Since 1957 (23.1 miles away, based in Chico, 4.6 stars from 34 reviews, lists Saturday hours); Lake Appliance Repair (50.2 miles away, based in Roseville, 4.7 stars from 642 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
GE Washer Error Codes
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- An error code on the display
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Oroville
Most washer calls in Oroville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Questions to Ask a Oroville Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
GE Washer Repair FAQs: Oroville, CA
Is this GE customer service?
Should I repair or replace my GE washer?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Related Repair Pages for Oroville
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.