A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Millbrae list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Millbrae
We found 40 appliance repair companies within 30 miles of Millbrae. 3 of them are based in Millbrae itself, and the rest are spread across Burlingame (12), San Mateo (9), and South San Francisco (7). Kitchen Aid Appliance Repair is the nearest, roughly 0.5 miles from Millbrae. No company within 90 miles of Millbrae mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 35 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 12 |
| Listing Saturday hours | 43 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 0.5, 0.6, 0.8 |
| Mention washer work | 11 |
At the top of the Millbrae list: UsProRepair (0.8 miles away, 5.0 stars from 110 reviews, lists Saturday hours); Appliance Repair (3.4 miles away, based in Burlingame, 4.7 stars from 141 reviews); Delta High End Appliance Repair (5.8 miles away, based in San Mateo, 4.9 stars from 162 reviews, lists Saturday hours); Commercial Home Products (4.3 miles away, based in San Mateo, 5.0 stars from 188 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Millbrae
Care GE Recommends for Its Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Laundry Notes for Millbrae, CA
Most washer calls in Millbrae come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Before You Book in Millbrae
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Millbrae, CA
What stops a washer from spinning?
Should I repair or replace my GE washer?
Where is the water under my washer coming from?
Why does my front-load washer smell?
Other Washer Repair in Millbrae
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.