A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Show Low, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Show Low
Within 60 miles of Show Low there are 5 appliance repair companies in our data. 1 of them are based in Show Low itself, and the rest are spread across Pinetop (2), Taylor (1), and Holbrook (1). Distances run up to about 44 miles. None of the repair companies near Show Low name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Sears Appliance Repair is the nearest, roughly 1.4 miles from Show Low. Rated companies nearby average 5.0 stars across 5 businesses. Because the nearest shops are farther out, ask each company whether Show Low is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (60 mi) | 5 |
|---|---|
| Listing Saturday hours | 1 |
| Mention washer work | 2 |
| Distance to the three closest (mi) | 1.4, 11.1, 14.3 |
| With 4.5+ stars and at least 10 reviews | 2 |
| Mention GE | 0 |
The leading options for Show Low are Sears Appliance Repair (1.4 miles away, 4.9 stars from 47 reviews, lists Saturday hours); Elite Appliance Repair LLC (11.1 miles away, based in Pinetop, 5.0 stars from 195 reviews); Atlas Appliance Repair Taylor (14.6 miles away, based in Taylor, 5.0 stars from 3 reviews); First Call Appliance Repair (14.3 miles away, based in Pinetop, 5.0 stars from 3 reviews).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Show Low, AZ
Most washer calls in Show Low come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Before You Book in Show Low
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
GE Washer Repair FAQs: Show Low, AZ
What stops a washer from spinning?
How do I find a technician who knows GE washers?
Why is my washer leaking?
What should I do about a GE error code?
Other Washer Repair in Show Low
GE Washer Repair in Nearby Cities
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Show Low technician bring the right parts.