If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Clarksville list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Clarksville AR
We found 22 appliance repair companies within 60 miles of Clarksville. Other nearby bases include Fort Smith (6), Van Buren (4), and Fayetteville (4). The closest is Affordable Appliance Repair Tech in Russellville, about 23.3 miles away. No company within 90 miles of Clarksville mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 18 rated companies, the average public rating is 4.4 stars. Clarksville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Clarksville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 6 |
|---|---|
| Mention GE | 0 |
| Appliance repair companies in range (60 mi) | 22 |
| Open on Saturdays (per listing) | 10 |
| Three nearest companies, miles away | 23.3, 24.6, 42.0 |
| With 4.5+ stars and at least 10 reviews | 7 |
The leading options for Clarksville are ALL-IN appliance repair (49.3 miles away, based in Winslow, 4.9 stars from 112 reviews); Sears Appliance Repair (24.6 miles away, based in Russellville, 4.3 stars from 63 reviews, lists Saturday hours); Affordable Appliances Fort Smith (51.7 miles away, based in Fort Smith, 4.6 stars from 198 reviews, lists Saturday hours); Sears Appliance Repair (59.6 miles away, based in Fayetteville, 4.4 stars from 134 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Local Notes for Clarksville
Most washer calls in Clarksville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
In Arkansas, you can check a license with the Arkansas Department of Health Protective Health Codes licensee search (plumbing and gas fitter licenses) or report a problem to the Arkansas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Clarksville
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Clarksville, AR
Is my GE washer worth repairing?
Why won't my washer spin?
Which Clarksville technicians work on GE?
Why does my GE washer show an error code?
Other Washer Repair in Clarksville
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.