Most Frigidaire washer repairs in Monroe involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Monroe, with those that mention Frigidaire first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Frigidaire. If your washer is still under manufacturer coverage, contact Frigidaire directly.
Who Works on Frigidaire Washers Near Monroe
Within 60 miles of Monroe there are 40 appliance repair companies in our data. The rest are spread across Madison (11), Freeport (6), and Janesville (4). None of the repair companies near Monroe name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Senneff Appliance Services, about 20.7 miles away. The 39 rated companies in range average 4.5 stars. Monroe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 22 |
|---|---|
| Distance to the three closest (mi) | 20.7, 21.2, 21.2 |
| Companies within 60 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 16 |
| Mention washer work | 11 |
| Mention Frigidaire | 0 |
Closest matches for Monroe: Champion Appliance Care (32.0 miles away, based in Madison, 4.8 stars from 190 reviews); A B Appliance Services & Repair (21.2 miles away, based in Freeport, 4.7 stars from 55 reviews, lists Saturday hours); Ghost Appliance Repair (30.4 miles away, based in Madison, 4.8 stars from 60 reviews); Mr. Appliance of Madison, WI (34.0 miles away, based in Middleton, 4.8 stars from 636 reviews).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
How Frigidaire Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
Frigidaire Washer Symptoms and First Checks
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Signs Your Frigidaire Washer Needs a Technician
- An error code on the display
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Care Frigidaire Recommends for Its Washers
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
Frigidaire Washer Repair Cost Ranges
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Monroe
Most washer calls in Monroe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Hiring a Washer Repair Company in Monroe
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
Frigidaire Washer Repair FAQs: Monroe, WI
Why does my front-load washer smell?
Where is the water under my washer coming from?
What stops a washer from spinning?
Why does my Frigidaire washer show an error code?
Other Washer Repair in Monroe
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.