Most Frigidaire washer repairs in Silver Firs involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Silver Firs list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Silver Firs WA
40 repair companies serve Silver Firs from within 30 miles. Other nearby bases include Everett (12), Bothell (7), and Lynnwood (7). The closest is HotWire Furnace, Air Conditioning & Appliance Repair Everett, about 1.1 miles away. None of the repair companies near Silver Firs name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.8 stars across 30 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 46 |
|---|---|
| Three nearest companies, miles away | 1.1, 1.3, 1.6 |
| Mention Frigidaire | 0 |
| Name washers or washing machines in their listing | 14 |
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 28 |
First up for Silver Firs: Ace Appliance Service (4.9 miles away, based in Everett, 5.0 stars from 322 reviews); Appliance Fixers (3.4 miles away, based in Bothell, 4.9 stars from 270 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Lynnwood, 4.7 stars from 413 reviews); HotWire Furnace, Air Conditioning & Appliance Repair Everett (1.1 miles away, based in Everett, 4.9 stars from 54 reviews, lists Saturday hours).
Know Your Frigidaire Washer
What Makes Frigidaire Washer Repairs Different
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
A top-load washer will not spin with the lid open, so an open lid can look like a drain problem. Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain
Frigidaire Washer Symptoms and First Checks
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
- Lid won't unlock. Stop the washer and give the lid lock one to three minutes to release, since the lid stays locked during spin. Source: Frigidaire - Top Load washer lid will not open
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
When to Call for Frigidaire Washer Repair
- An error code on the display
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a Frigidaire Washer Running
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
Budgeting for a Frigidaire Washer Repair
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Silver Firs Owners Should Know
Most washer calls in Silver Firs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Silver Firs
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
Frigidaire Washer Repair FAQs: Silver Firs, WA
What stops a washer from spinning?
Which Silver Firs technicians work on Frigidaire?
Is this Frigidaire customer service?
Related Repair Pages for Silver Firs
More Frigidaire Washer Repair Pages Nearby
Write down any error code your Frigidaire washer shows and at what point in the cycle it appears. It helps a Silver Firs technician bring the right parts.