Most Frigidaire washer repairs in Mountlake Terrace involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Mountlake Terrace, with those that mention Frigidaire first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Frigidaire. If your washer is still under manufacturer coverage, contact Frigidaire directly.
Frigidaire Washer Repair Near Mountlake Terrace
We found 40 appliance repair companies within 30 miles of Mountlake Terrace. 4 of them are based in Mountlake Terrace itself, and the rest are spread across Bothell (8), Lynnwood (7), and Edmonds (5). The farthest listed company is about 7 miles out. None of the repair companies near Mountlake Terrace name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is A-Service: Heating, Cooling & Appliance Repair, about 0.7 miles away. Rated companies nearby average 4.8 stars across 32 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.7, 0.8, 1.0 |
|---|---|
| Name washers or washing machines in their listing | 14 |
| With 4.5+ stars and at least 10 reviews | 25 |
| Open on Saturdays (per listing) | 42 |
| Companies within 30 miles | 60 |
| Mention Frigidaire | 0 |
The leading options for Mountlake Terrace are Ace Appliance Service (6.6 miles away, based in Everett, 5.0 stars from 322 reviews); Sears Appliance Repair (3.1 miles away, based in Lynnwood, 4.7 stars from 413 reviews); HotWire Furnace, Air Conditioning & Appliance Repair Bothell (2.7 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); Fast Appliances Repair (4.6 miles away, based in Edmonds, 4.9 stars from 116 reviews, lists Saturday hours).
Know which Frigidaire washer you have before you call. Frigidaire makes top-load and laundry center models, and the technician will ask.
Frigidaire Washer Lines and Features
What Makes Frigidaire Washer Repairs Different
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
Frigidaire Washer Symptoms and First Checks
- Washer not draining. Check whether the washer was moved or the drain hose bumped, then straighten any kink in the drain hose. Source: Frigidaire - Top loading washer is not draining
- Washer not filling. Make sure both the hot and cold supply faucets are fully open. Source: Frigidaire - Top Load washer not filling with water properly
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Frigidaire Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Keeping a Frigidaire Washer Running
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
Frigidaire Washer Repair Cost Ranges
Price the repair before replacing a Frigidaire washer. Published ranges for common jobs:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Around Mountlake Terrace
Most washer calls in Mountlake Terrace come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Mountlake Terrace
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Frigidaire Washer Repair FAQs: Mountlake Terrace, WA
What stops a washer from spinning?
How do I get rid of a washer mildew smell?
Why does my Frigidaire washer show an error code?
Related Repair Pages for Mountlake Terrace
More Frigidaire Washer Repair Pages Nearby
Frigidaire Washer Repair for Towns Near Mountlake Terrace
The technicians listed for Mountlake Terrace also cover smaller towns nearby, including Brier. If you are in one of them, the companies above are your closest Frigidaire washer repair options, and our helpline covers you too.
Write down any error code your Frigidaire washer shows and at what point in the cycle it appears. It helps a Mountlake Terrace technician bring the right parts.