Most Frigidaire washer repairs in Lumberton involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Frigidaire and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Frigidaire. If your washer is still under manufacturer coverage, contact Frigidaire directly.
Independent Frigidaire Washer Technicians, Lumberton NC
We found 13 appliance repair companies within 30 miles of Lumberton. 4 of them are based in Lumberton itself, and other nearby bases include Fayetteville (5), Pembroke (1), and Shannon (1). Nearest on the list: Sears Appliance Repair, around 1.9 miles out. None of the repair companies near Lumberton name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.1 stars across 13 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 6 |
|---|---|
| Three nearest companies, miles away | 1.9, 2.2, 4.0 |
| Name washers or washing machines in their listing | 3 |
| Mention Frigidaire | 0 |
| Appliance repair companies in range (30 mi) | 13 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
At the top of the Lumberton list: Sears Appliance Repair (1.9 miles away, 4.4 stars from 110 reviews, lists Saturday hours); Thomas Supply (4.6 miles away, 4.4 stars from 78 reviews, lists Saturday hours); Glenn's Appliance Services (10.4 miles away, based in Pembroke, 4.6 stars from 24 reviews); Appliance Repair Fayetteville NC (29.0 miles away, based in Fayetteville, 4.4 stars from 14 reviews).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
How Frigidaire Washers Are Built
The washer tries to correct an unbalanced load on its own and shows E4 once it has failed three times. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
What Frigidaire Says to Check First
- Washer not draining. Check whether the washer was moved or the drain hose bumped, then straighten any kink in the drain hose. Source: Frigidaire - Top loading washer is not draining
- Washer won't start. First confirm the washer is sitting level. Source: Frigidaire - What should I do if my washer does not start?
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
When to Call for Frigidaire Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Lumberton
Care Frigidaire Recommends for Its Washers
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Empty pockets of coins and buckles and secure the drain hose with zip ties to stop rattling and knocking. Source: Frigidaire - Laundry Washers Noises Guide
Budgeting for a Frigidaire Washer Repair
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Lumberton, NC
Most washer calls in Lumberton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Lumberton Washer Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
Frigidaire Washer Repair FAQs: Lumberton, NC
What should I do about a Frigidaire error code?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Is my Frigidaire washer worth repairing?
More Washing Machine Repair in Lumberton, NC
Frigidaire Washer Repair in Nearby Cities
Also Serving Towns Around Lumberton
Live outside Lumberton? The same Frigidaire washer repair technicians serve Pembroke and Whiteville. See each town's own washing machine repair listings below.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Frigidaire repair.