If your Bosch washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Lumberton, with those that mention Bosch first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Bosch. Listed companies are independent technicians who repair Bosch washers and other brands.
Bosch Washer Repair Near Lumberton
Our data shows 13 appliance repair companies inside a 30-mile radius of Lumberton. 4 list an address in Lumberton, and other nearby bases include Fayetteville (5), Pembroke (1), and Shannon (1). Distances run up to about 30 miles. Sears Appliance Repair is the nearest, roughly 1.9 miles from Lumberton. No company within 90 miles of Lumberton mentions Bosch by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 13 rated companies, the average public rating is 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 4 |
|---|---|
| Mention washer work | 3 |
| Appliance repair companies in range (30 mi) | 13 |
| Mention Bosch | 0 |
| Listing Saturday hours | 6 |
| Three nearest companies, miles away | 1.9, 2.2, 4.0 |
First up for Lumberton: Sears Appliance Repair (1.9 miles away, 4.4 stars from 110 reviews, lists Saturday hours); Heating And Air Conditioning & Washer Fayetteville (29.7 miles away, based in Fayetteville, 4.5 stars from 6 reviews, lists Saturday hours); Trinity Appliance Service (12.9 miles away, based in Shannon, 4.9 stars from 67 reviews); Appliance Repair Fayetteville NC (29.0 miles away, based in Fayetteville, 4.4 stars from 14 reviews).
Know which Bosch washer you have before you call. Bosch makes front-load models, and the technician will ask.
Bosch Washer Lines and Features
How Bosch Washers Are Built
The AquaStop inlet hose contains an electric valve, so it must never be submerged, and its screen filter is cleaned at the faucet end of the hose. Source: Bosch - Water is not running into the washer
The door must latch fully before a cycle runs, and Bosch reports an unlatched door with codes E16, E34, F16 or F34. Source: Bosch - Washer Error Codes
Common Bosch Washer Problems
- Washer not filling. Bosch has owners clean the filters at the water connection or AquaStop hose first, then test water pressure by timing the faucet's flow into a bucket. Source: Bosch - Water is not running into the washer
- Washer not draining. Bosch starts with the hoses: clean the inlet hose filters, make sure the drain hose isn't kinked or blocked, then unplug the washer and clean the drain pump behind the service flap. Source: Bosch - Why Won't My Bosch Washing Machine Drain? How to Resolve
Reading a Bosch Washer Error Code
| Code | What it means |
|---|---|
| E32 / F32 | Load is out of balance. Source: Bosch - Washer Error Codes |
| E:30 / -80 | Drain problem, such as a clogged pump, hose or drain pipe, a kinked hose, a drain hose mounted too high, or a loose pump cap. Source: Bosch - Washer Error Codes |
| E18 / F18 | Drain hose is blocked or kinked, or the pump needs cleaning. Source: Bosch - Washer Error Codes |
When to Call for Bosch Washer Repair
- Burning smell or a motor that hums without turning
- An error code on the display
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a Bosch Washer Running
- Clean the screen filters in the inlet hose connections with a small brush when the washer fills slowly or not at all. Source: Bosch - Water is not running into the washer
- Wipe the rubber door seal with a soft damp cloth, and avoid harsh scrubbing agents and chlorine-based cleaners, which can break down the rubber. Source: Bosch - Cleaning Washing Machine Seal
Budgeting for a Bosch Washer Repair
Most Bosch washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Local Notes for Lumberton
Most washer calls in Lumberton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Lumberton
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
Bosch Washer Repair FAQs: Lumberton, NC
Why does my Bosch washer show an error code?
Why won't my washer spin?
Do you work for Bosch?
Which Lumberton technicians work on Bosch?
Related Repair Pages for Lumberton
More Bosch Washer Repair Pages Nearby
Before you call, find the model and serial number on your Bosch washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.