If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Rolla, with those that mention Frigidaire first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Rolla MO
Within 60 miles of Rolla there are 21 appliance repair companies in our data. 2 of them are based in Rolla itself, and the rest are spread across Jefferson City (6), Lebanon (3), and Union (2). The closest is Appliance Repair Pros, about 0.7 miles away. None of the repair companies near Rolla name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 20 rated companies in range average 4.3 stars. Rolla is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 5 |
|---|---|
| Open on Saturdays (per listing) | 10 |
| Three nearest companies, miles away | 0.7, 3.3, 24.3 |
| Mention Frigidaire | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Appliance repair companies in range (60 mi) | 21 |
Closest matches for Rolla: Appliance RX (3.3 miles away, 4.9 stars from 888 reviews); Appliance Repair Pros (0.7 miles away, 4.4 stars from 49 reviews); Sears Appliance Repair (52.6 miles away, based in Lebanon, 4.7 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (50.4 miles away, based in Jefferson City, 4.1 stars from 49 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines Technicians Work On
How Frigidaire Washers Are Built
A top-load washer will not spin with the lid open, so an open lid can look like a drain problem. Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain
What Frigidaire Says to Check First
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Signs Your Frigidaire Washer Needs a Technician
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for Frigidaire Washers
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
Budgeting for a Frigidaire Washer Repair
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Any error code shown on the display
What Rolla Owners Should Know
Most washer calls in Rolla come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Washer Repair Company in Rolla
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
Frigidaire Washer Repair FAQs: Rolla, MO
Why is my washer leaking?
Why does my front-load washer smell?
Why does my Frigidaire washer show an error code?
More Washing Machine Repair in Rolla, MO
Frigidaire Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.