A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Evanston WY
We found 40 appliance repair companies within 60 miles of Evanston. 1 list an address in Evanston, and other nearby bases include Salt Lake City (9), Ogden (3), and Clearfield (3). No company within 90 miles of Evanston mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Dave's Appliance Repair, about 0.3 miles away. The 32 rated companies in range average 4.6 stars. Because the nearest shops are farther out, ask each company whether Evanston is inside its regular service area.
Companies are shown by relevance and distance from Evanston. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Electrolux | 0 |
|---|---|
| Three nearest companies, miles away | 0.3, 50.7, 51.5 |
| Companies within 60 miles | 50 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Name washers or washing machines in their listing | 1 |
| Listing Saturday hours | 32 |
At the top of the Evanston list: Dave's Appliance Repair (0.3 miles away, 4.5 stars from 36 reviews); Baseline Home Maintenance (58.9 miles away, based in Salt Lake City, 5.0 stars from 258 reviews, lists Saturday hours); iFiX, LLC (55.0 miles away, based in Riverdale, 4.9 stars from 436 reviews); R.A.C.E.R. Service Appliance Repair (53.3 miles away, based in Nibley, 4.7 stars from 12 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Electrolux Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Evanston Washer Call
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Evanston
Most washer calls in Evanston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing
In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.
How to Choose a Washing Machine Technician Near Evanston
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Evanston, WY
Which Evanston technicians work on Electrolux?
Should I repair or replace my Electrolux washer?
Do you work for Electrolux?
Why does my Electrolux washer show an error code?
Related Repair Pages for Evanston
Electrolux Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.