If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Port Washington list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Port Washington
We found 40 appliance repair companies within 30 miles of Port Washington. Other nearby bases include Milwaukee (14), Wauwatosa (5), and Saukville (2). Distances run up to about 26 miles. Nearest on the list: Appliance Rescue Service, around 3.1 miles out. None of the repair companies near Port Washington name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.0 stars across 36 businesses.
Companies are shown by relevance and distance from Port Washington. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 6 |
|---|---|
| Companies within 30 miles | 53 |
| Open on Saturdays (per listing) | 21 |
| Three nearest companies, miles away | 3.1, 3.4, 6.4 |
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
The leading options for Port Washington are Sears Appliance Repair (11.7 miles away, based in Mequon, 4.1 stars from 142 reviews, lists Saturday hours); Milwaukee Appliance (17.0 miles away, based in Germantown, 4.1 stars from 157 reviews, lists Saturday hours); Sixth Sense Service, LLC (25.1 miles away, based in Wauwatosa, 4.7 stars from 50 reviews); Advent Appliance Repair Service (6.4 miles away, based in Grafton, 4.8 stars from 170 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What Makes Electrolux Washer Repairs Different
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Electrolux Washer Symptoms and First Checks
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Port Washington
Keeping a Electrolux Washer Running
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Around Port Washington
Most washer calls in Port Washington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Questions to Ask a Port Washington Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Port Washington, WI
Is my Electrolux washer worth repairing?
Do you work for Electrolux?
Why does my Electrolux washer show an error code?
Why won't my washer spin?
Related Repair Pages for Port Washington
Electrolux Washer Repair in Nearby Cities
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Port Washington technician bring the right parts.