Most Electrolux washer repairs in Fox Crossing involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Fox Crossing, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Fox Crossing
24 repair companies serve Fox Crossing from within 30 miles. The rest are spread across Appleton (7), Green Bay (6), and Oshkosh (4). Nearest on the list: Sears Appliance Repair, around 2.6 miles out. No company within 90 miles of Fox Crossing mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 22 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Fox Crossing. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Electrolux | 0 |
|---|---|
| Name washers or washing machines in their listing | 6 |
| Listing Saturday hours | 10 |
| Repair companies inside 30 miles | 24 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Three nearest companies, miles away | 2.6, 2.7, 3.5 |
First up for Fox Crossing: Mr. Appliance of Green Bay (25.3 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Mr. Appliance of Appleton (14.2 miles away, based in Kaukauna, 4.9 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (2.6 miles away, based in Appleton, 4.2 stars from 70 reviews, lists Saturday hours); Mr. Appliance of Oshkosh (15.8 miles away, based in Oshkosh, 4.9 stars from 157 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Fox Crossing, WI
Most washer calls in Fox Crossing come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Questions to Ask a Fox Crossing Washer Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Electrolux Washer Repair FAQs: Fox Crossing, WI
Why does my Electrolux washer show an error code?
Why won't my washer spin?
Should I repair or replace my Electrolux washer?
Other Washer Repair in Fox Crossing
Electrolux Washer Repair in Nearby Cities
Nearby Towns Served From Fox Crossing
The technicians listed for Fox Crossing also cover smaller towns nearby, including New London. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.