If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Sumner, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Sumner WA
Our data shows 40 appliance repair companies inside a 30-mile radius of Sumner. 1 list an address in Sumner, and other nearby bases include Auburn (12), Federal Way (6), and Tacoma (6). Distances run up to about 11 miles. The closest is Direct Service Appliance Repair Sumner, about 1.2 miles away. No company within 90 miles of Sumner mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 30 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 21 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Listing Saturday hours | 34 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 1.2, 3.7, 4.4 |
| Mention washer work | 13 |
The leading options for Sumner are Sears Appliance Repair (5.3 miles away, based in Puyallup, 4.5 stars from 317 reviews, lists Saturday hours); Leon's Luxury repair & installation (8.5 miles away, based in Tacoma, 4.7 stars from 51 reviews); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (8.4 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Appliances Repair Solutions (7.9 miles away, based in Auburn, 4.9 stars from 62 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Common Electrolux Washer Problems
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Sumner Washer Call
Owner Care for Electrolux Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Local Notes for Sumner
Most washer calls in Sumner come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Sumner
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Sumner, WA
What stops a washer from spinning?
Where is the water under my washer coming from?
Why does my front-load washer smell?
Other Washer Repair in Sumner
Electrolux Washer Repair Near Sumner
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.