Most Electrolux washer repairs in Schertz involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Schertz, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Schertz TX
40 repair companies serve Schertz from within 30 miles. 5 of them are based in Schertz itself, and the rest are spread across San Antonio (12), New Braunfels (7), and Converse (6). Distances run up to about 12 miles. The closest is Schertz ApplianceRepair Technologies, about 0.7 miles away. None of the repair companies near Schertz name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 34 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 10 |
|---|---|
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 42 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 0.7, 0.9, 0.9 |
| With 4.5+ stars and at least 10 reviews | 18 |
Closest matches for Schertz: Mr. Appliance of San Antonio (9.8 miles away, based in San Antonio, 4.6 stars from 796 reviews, lists Saturday hours); Mr. Appliance of Comal & Guadalupe (10.1 miles away, based in New Braunfels, 4.8 stars from 1,033 reviews, lists Saturday hours); Quick Tweak Appliance Repair (11.6 miles away, based in San Antonio, 5.0 stars from 264 reviews, lists Saturday hours); Appliance Guys (11.3 miles away, based in New Braunfels, 4.9 stars from 127 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Schertz Owners Should Know
Most washer calls in Schertz come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Schertz
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Schertz, TX
Do you work for Electrolux?
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Related Repair Pages for Schertz
Electrolux Washer Repair Near Schertz
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.