A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Grand Prairie
40 repair companies serve Grand Prairie from within 30 miles. 7 of them are based in Grand Prairie itself, and the rest are spread across Arlington (19), Dallas (5), and Cedar Hill (3). The farthest listed company is about 10 miles out. None of the repair companies near Grand Prairie name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Cooper Appliance Repair, around 1.8 miles out. Rated companies nearby average 4.8 stars across 32 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 13 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Distance to the three closest (mi) | 1.8, 2.5, 3.6 |
| Listing Saturday hours | 45 |
| Mention Electrolux | 0 |
The leading options for Grand Prairie are Appliance Fix Experts (5.9 miles away, based in Arlington, 4.9 stars from 43 reviews, lists Saturday hours); Two Brothers Appliance (4.9 miles away, based in Arlington, 4.9 stars from 183 reviews, lists Saturday hours); Sears Appliance Repair (6.5 miles away, based in Arlington, 4.5 stars from 557 reviews, lists Saturday hours); Appliance Recovery-Appliance Repair (6.2 miles away, 5.0 stars from 310 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Common Electrolux Washer Problems
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
When to Call for Electrolux Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Around Grand Prairie
Most washer calls in Grand Prairie come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Grand Prairie Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Grand Prairie, TX
Where is the water under my washer coming from?
Should I repair or replace my Electrolux washer?
Do you work for Electrolux?
Other Washer Repair in Grand Prairie
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.