Most Electrolux washer repairs in Cleburne involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Cleburne, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Cleburne TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Cleburne. 2 list an address in Cleburne, and the rest are spread across Fort Worth (15), Crowley (5), and Granbury (4). Distances run up to about 26 miles. No company within 90 miles of Cleburne mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is A Millsap Appliance Repair, about 1.4 miles away. Rated companies nearby average 4.5 stars across 35 businesses.
Companies are shown by relevance and distance from Cleburne. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 40 |
|---|---|
| Three nearest companies, miles away | 1.4, 1.6, 5.5 |
| Repair companies inside 30 miles | 60 |
| Name washers or washing machines in their listing | 17 |
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 29 |
First up for Cleburne: Sears Appliance Repair (1.6 miles away, 4.3 stars from 103 reviews, lists Saturday hours); Home Care Appliance Repair (21.2 miles away, based in Granbury, 5.0 stars from 120 reviews); Mr. Appliance of Fort Worth (25.4 miles away, based in Fort Worth, 4.7 stars from 403 reviews, lists Saturday hours); Appliance Fix Experts (24.2 miles away, based in Mansfield, 4.9 stars from 41 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Electrolux Washer Symptoms and First Checks
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
When to Call for Electrolux Washer Repair
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Cleburne
Most washer calls in Cleburne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Cleburne
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Electrolux Washer Repair FAQs: Cleburne, TX
Where is the water under my washer coming from?
Why won't my washer spin?
Why does my front-load washer smell?
Which Cleburne technicians work on Electrolux?
Related Repair Pages for Cleburne
More Electrolux Washer Repair Pages Nearby
Also Serving Towns Around Cleburne
Electrolux washer repair for Keene is handled by the same companies listed for Cleburne. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.