If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Five Forks, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Five Forks
Within 30 miles of Five Forks there are 29 appliance repair companies in our data. Other nearby bases include Greenville (10), Spartanburg (5), and Simpsonville (2). Distances run up to about 28 miles. Nearest on the list: Appliance Works Repair & Service LLC, around 0.7 miles out. None of the repair companies near Five Forks name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 29 rated companies, the average public rating is 4.2 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 13 |
|---|---|
| Distance to the three closest (mi) | 0.7, 2.6, 3.6 |
| Listing Saturday hours | 17 |
| Repair companies inside 30 miles | 29 |
| Name washers or washing machines in their listing | 8 |
| Mention Electrolux | 0 |
Closest matches for Five Forks: Appliance GrandMasters (12.9 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); Mr. Appliance of Greater Greenville (3.6 miles away, based in Greenville, 4.8 stars from 1,221 reviews); The Olde Homestead, Inc. (12.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Sears Appliance Repair (10.9 miles away, based in Greenville, 4.4 stars from 72 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Common Electrolux Washer Problems
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
When to Call for Electrolux Washer Repair
- Water on the floor under or in front of the washer
- An error code on the display
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Five Forks, SC
Most washer calls in Five Forks come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Hiring a Washer Repair Company in Five Forks
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Five Forks, SC
Is my Electrolux washer worth repairing?
What stops a washer from spinning?
Why does my Electrolux washer show an error code?
More Washing Machine Repair in Five Forks, SC
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.