Electrolux Washer Repair in State College, PA

A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving State College, with those that mention Electrolux first, then the nearest appliance repair companies.

This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.

Electrolux Washer Repair Near State College

40 repair companies serve State College from within 60 miles. 2 of them are based in State College itself, and other nearby bases include Altoona (4), Mechanicsburg (4), and Duncansville (2). Nearest on the list: Mike's Video TV & Appliances, around 2.0 miles out. None of the repair companies near State College name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 38 rated companies, the average public rating is 4.3 stars. State College is a smaller market, so expect a longer drive and ask whether a trip charge applies.

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

First up for State College: Martin Appliance (29.7 miles away, based in Altoona, 4.9 stars from 727 reviews, lists Saturday hours); Sears Appliance Repair (4.1 miles away, 4.3 stars from 58 reviews, lists Saturday hours); Sears Appliance Repair (31.0 miles away, based in Lock Haven, 4.5 stars from 16 reviews, lists Saturday hours); Sears Appliance Repair (18.4 miles away, based in Burnham, 2.3 stars from 3 reviews, lists Saturday hours).

Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Know Your Electrolux Washer

What Makes Electrolux Washer Repairs Different

Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide

The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure

Electrolux Washer Symptoms and First Checks

• Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
• Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator

Reading a Electrolux Washer Error Code

Signs Your Electrolux Washer Needs a Technician

• Water left in the drum after the cycle
• Burning smell or a motor that hums without turning
• Washer fills slowly, will not fill, or keeps filling

How a Washer Service Call Usually Goes in State College

Keeping a Electrolux Washer Running

• Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
• Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

Budgeting for a Electrolux Washer Repair

A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:

• Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
• Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
• Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
• Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
• Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

• The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
• Where the washer drains (standpipe or laundry sink)
• Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller

Local Notes for State College

Most washer calls in State College come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Hiring a Washer Repair Company in State College

• How often do you repair Electrolux washers, and how quickly can you get parts?
• Will you check the drain pump filter and drain hose before replacing the pump?
• What guarantee do you give on parts and labor?

Electrolux Washer Repair FAQs: State College, PA

More Washing Machine Repair in State College, PA

More Electrolux Washer Repair Pages Nearby

Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a State College technician bring the right parts.