Most Electrolux washer repairs in Somerset involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Somerset list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Somerset
40 repair companies serve Somerset from within 60 miles. 1 of them are based in Somerset itself, and the rest are spread across Johnstown (3), Uniontown (3), and Connellsville (2). Distances run up to about 48 miles. Dean's Appliance Repair LLC is the nearest, roughly 0.3 miles from Somerset. No company within 90 miles of Somerset mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.0 stars across 37 businesses. Somerset is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Somerset. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 12 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| With 4.5+ stars and at least 10 reviews | 18 |
| Mention Electrolux | 0 |
| Repair companies inside 60 miles | 60 |
| Three nearest companies, miles away | 0.3, 20.1, 22.4 |
Closest matches for Somerset: Sears Appliance Repair (23.9 miles away, based in Johnstown, 4.2 stars from 55 reviews, lists Saturday hours); Dean's Appliance Repair LLC (0.3 miles away, 4.8 stars from 140 reviews); Sears Appliance Repair (44.7 miles away, based in North Versailles Township, 4.4 stars from 397 reviews, lists Saturday hours); Sears Appliance Repair (36.0 miles away, based in Uniontown, 4.8 stars from 41 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Signs Your Electrolux Washer Needs a Technician
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Somerset Washer Call
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Somerset
Most washer calls in Somerset come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
In Pennsylvania, you can check a license with the PA Office of Attorney General Home Improvement Contractor Registration Search or report a problem to the Pennsylvania Office of Attorney General.
Questions to Ask a Somerset Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
Electrolux Washer Repair FAQs: Somerset, PA
Why does my Electrolux washer show an error code?
Is this Electrolux customer service?
Where is the water under my washer coming from?
More Washing Machine Repair in Somerset, PA
Electrolux Washer Repair Near Somerset
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.