If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Keizer list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Keizer
23 repair companies serve Keizer from within 30 miles. The rest are spread across Salem (7), Sherwood (3), and McMinnville (2). Distances run up to about 30 miles. None of the repair companies near Keizer name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Bogard Appliances and Refrigeration, LLC is the nearest, roughly 3.6 miles from Keizer. Across 20 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 3 |
|---|---|
| Three nearest companies, miles away | 3.6, 3.7, 3.9 |
| Mention Electrolux | 0 |
| Repair companies inside 30 miles | 23 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Listing Saturday hours | 10 |
The leading options for Keizer are Sears Appliance Repair (4.7 miles away, based in Salem, 4.3 stars from 140 reviews, lists Saturday hours); ATS Appliance Repair (18.1 miles away, based in McMinnville, 4.9 stars from 395 reviews, lists Saturday hours); JL's Appliances (4.4 miles away, based in Salem, 4.5 stars from 330 reviews); Bogard Appliances and Refrigeration, LLC (3.6 miles away, based in Salem, 4.9 stars from 100 reviews).
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Around Keizer
Most washer calls in Keizer come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Questions to Ask a Keizer Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Keizer, OR
What stops a washer from spinning?
Why does my front-load washer smell?
Which Keizer technicians work on Electrolux?
What should I do about a Electrolux error code?
Related Repair Pages for Keizer
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.