If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Springdale list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Springdale NJ
We found 40 appliance repair companies within 30 miles of Springdale. The rest are spread across Cherry Hill Township (18), Haddonfield (3), and Voorhees Township (2). The farthest listed company is about 7 miles out. None of the repair companies near Springdale name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Zenith Applaince Repairs Help, around 1.7 miles out. Across 36 rated companies, the average public rating is 4.9 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 18 |
|---|---|
| Distance to the three closest (mi) | 1.7, 1.8, 1.8 |
| Open on Saturdays (per listing) | 46 |
| Companies within 30 miles | 60 |
| Mention washer work | 9 |
| Mention Electrolux | 0 |
Closest matches for Springdale: Mr. Appliance of Cherry Hill (3.1 miles away, based in Marlton, 4.6 stars from 541 reviews, lists Saturday hours); Sears Appliance Repair (4.8 miles away, based in Moorestown, 4.6 stars from 287 reviews, lists Saturday hours); South Jersey Appliance (7.4 miles away, based in Blackwood, 4.9 stars from 45 reviews); NU~AIR THE HEALTHY CHOICE Inc. (6.2 miles away, based in Pennsauken, 4.6 stars from 196 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
What Makes Electrolux Washer Repairs Different
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Springdale Washer Call
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Springdale
Most washer calls in Springdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Hiring a Washer Repair Company in Springdale
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Springdale, NJ
What stops a washer from spinning?
What should I do about a Electrolux error code?
Should I repair or replace my Electrolux washer?
Where is the water under my washer coming from?
Other Washer Repair in Springdale
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.