Most Electrolux washer repairs in Dover involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Dover NH
18 repair companies serve Dover from within 30 miles. The rest are spread across Epping (2), Haverhill (2), and Hooksett (2). Nearest on the list: PJ's Appliance Repair, around 5.8 miles out. No company within 90 miles of Dover mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.3 stars across 17 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| Repair companies inside 30 miles | 18 |
| Distance to the three closest (mi) | 5.8, 6.8, 7.9 |
| Name washers or washing machines in their listing | 4 |
| Open on Saturdays (per listing) | 6 |
| Mention Electrolux | 0 |
At the top of the Dover list: Mr. Appliance of Strafford and Rockingham Counties (13.4 miles away, based in Epping, 4.8 stars from 945 reviews); Appliance Services, LLC (14.1 miles away, based in Epping, 4.9 stars from 175 reviews); Batteries Plus Phone Repair (7.9 miles away, based in Newington, 4.9 stars from 198 reviews, lists Saturday hours); Appliance Medic LLC (26.2 miles away, based in Auburn, 4.8 stars from 75 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Common Electrolux Washer Problems
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Dover
Most washer calls in Dover come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
In New Hampshire, you can check a license with the NH Office of Professional Licensure and Certification License Lookup or report a problem to the New Hampshire Department of Justice, Consumer Protection & Antitrust Bureau.
Questions to Ask a Dover Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
Electrolux Washer Repair FAQs: Dover, NH
Do you work for Electrolux?
Why is my washer leaking?
Why won't my washer spin?
How do I find a technician who knows Electrolux washers?
Other Washer Repair in Dover
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.