If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Kinston list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Kinston NC
We found 40 appliance repair companies within 60 miles of Kinston. 1 list an address in Kinston, and other nearby bases include Goldsboro (5), Jacksonville (5), and Washington (4). No company within 90 miles of Kinston mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Highland Appliance, around 1.1 miles out. The 34 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether Kinston is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 10 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Listing Saturday hours | 28 |
| Mention Electrolux | 0 |
| Appliance repair companies in range (60 mi) | 50 |
| Three nearest companies, miles away | 1.1, 17.4, 20.9 |
First up for Kinston: Sears Appliance Repair (20.9 miles away, based in Goldsboro, 4.7 stars from 225 reviews, lists Saturday hours); Cavalry Appliance Service (31.3 miles away, based in New Bern, 4.9 stars from 535 reviews); Sears Appliance Repair (22.6 miles away, based in Greenville, 4.3 stars from 220 reviews, lists Saturday hours); Sears Appliance Repair (37.1 miles away, based in Jacksonville, 4.6 stars from 234 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
Electrolux Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Kinston, NC
Most washer calls in Kinston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Kinston Washer Technician
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Kinston, NC
Should I repair or replace my Electrolux washer?
Is this Electrolux customer service?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Other Washer Repair in Kinston
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.