A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Sartell
We found 12 appliance repair companies within 30 miles of Sartell. Other nearby bases include St Cloud (5), Sauk Rapids (2), and Richmond (1). Distances run up to about 29 miles. The closest is Sears Appliance Repair, about 4.3 miles away. No company within 90 miles of Sartell mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 12 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 12 |
|---|---|
| Mention washer work | 4 |
| With 4.5+ stars and at least 10 reviews | 6 |
| Listing Saturday hours | 6 |
| Three nearest companies, miles away | 4.3, 4.4, 4.6 |
| Mention Electrolux | 0 |
The leading options for Sartell are Omega Force Appliance Repair (6.4 miles away, based in St Cloud, 4.8 stars from 199 reviews, lists Saturday hours); Sears Appliance Repair (4.3 miles away, based in St Cloud, 4.4 stars from 86 reviews, lists Saturday hours); Home Appliance Service (28.9 miles away, based in Maple Lake, 5.0 stars from 230 reviews, lists Saturday hours); Crosstown Appliance Repair (18.6 miles away, based in Richmond, 4.8 stars from 154 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Common Electrolux Washer Problems
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
What Gets Fixed on a Sartell Washer Call
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Around Sartell
Most washer calls in Sartell come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in Sartell
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Sartell, MN
How do I find a technician who knows Electrolux washers?
What should I do about a Electrolux error code?
Why does my front-load washer smell?
Other Washer Repair in Sartell
Electrolux Washer Repair Near Sartell
Also Serving Towns Around Sartell
Electrolux washer repair for St. Joseph and Little Falls is handled by the same companies listed for Sartell. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.