Electrolux owners in South Portland usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, South Portland ME
We found 25 appliance repair companies within 60 miles of South Portland. 1 list an address in South Portland, and other nearby bases include Portland (5), Auburn (3), and Epping (2). Distances run up to about 59 miles. Agren is the nearest, roughly 1.9 miles from South Portland. No company within 90 miles of South Portland mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 24 rated companies in range average 4.2 stars. Because the nearest shops are farther out, ask each company whether South Portland is inside its regular service area.
Companies are shown by relevance and distance from South Portland. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 5 |
|---|---|
| Listing Saturday hours | 11 |
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Three nearest companies, miles away | 1.9, 2.3, 3.1 |
| Companies within 60 miles | 25 |
The leading options for South Portland are Agren (1.9 miles away, 4.8 stars from 2,172 reviews, lists Saturday hours); Mr. Appliance of Strafford and Rockingham Counties (56.1 miles away, based in Epping, 4.8 stars from 945 reviews); Metropolitan Services (2.3 miles away, based in Portland, 4.8 stars from 76 reviews); Appliance Services, LLC (56.8 miles away, based in Epping, 4.9 stars from 175 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Common Electrolux Washer Problems
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Signs Your Electrolux Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in South Portland
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for South Portland
Most washer calls in South Portland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)
In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near South Portland
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: South Portland, ME
Why does my front-load washer smell?
Is my Electrolux washer worth repairing?
What should I do about a Electrolux error code?
Related Repair Pages for South Portland
Electrolux Washer Repair Near South Portland
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.