If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Kettering
40 repair companies serve Kettering from within 30 miles. The rest are spread across Washington (7), Hyattsville (4), and Bowie (3). Distances run up to about 12 miles. Nearest on the list: Tanzanite Appliance Repair, around 1.2 miles out. No company within 90 miles of Kettering mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.0 stars across 40 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 37 |
|---|---|
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 1.2, 2.9, 4.9 |
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention washer work | 11 |
The leading options for Kettering are Mr. Appliance of Central Maryland (2.9 miles away, based in Largo, 4.8 stars from 330 reviews); SK Appliance Repair (7.6 miles away, based in Camp Springs, 5.0 stars from 404 reviews, lists Saturday hours); Tanzanite Appliance Repair (1.2 miles away, based in Upper Marlboro, 4.4 stars from 49 reviews, lists Saturday hours); Sears Appliance Repair (9.6 miles away, based in Clinton, 4.1 stars from 220 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
Electrolux Washer Problems Worth a Service Call
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Kettering Washer Call
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Kettering Owners Should Know
Most washer calls in Kettering come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Questions to Ask a Kettering Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Kettering, MD
Why won't my washer spin?
Why does my Electrolux washer show an error code?
Do you work for Electrolux?
Why is my washer leaking?
Related Repair Pages for Kettering
Electrolux Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.