If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Franklin, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Franklin
We found 40 appliance repair companies within 30 miles of Franklin. 1 list an address in Franklin, and the rest are spread across Indianapolis (17), Greenwood (12), and Shelbyville (3). Distances run up to about 20 miles. No company within 90 miles of Franklin mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Network LLC, about 1.6 miles away. The 35 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 36 |
|---|---|
| Distance to the three closest (mi) | 1.6, 4.1, 5.3 |
| Mention Electrolux | 0 |
| Companies within 30 miles | 58 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Name washers or washing machines in their listing | 19 |
The leading options for Franklin are McCollum Appliance Repair (10.1 miles away, based in Greenwood, 5.0 stars from 282 reviews); Mr. Appliance of Indianapolis (18.2 miles away, based in Indianapolis, 4.6 stars from 1,054 reviews, lists Saturday hours); High Def Appliance (20.0 miles away, based in Columbus, 4.6 stars from 82 reviews); Nate's Appliance Repair & HVAC (16.5 miles away, based in Indianapolis, 4.8 stars from 206 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Franklin
Keeping a Electrolux Washer Running
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Local Notes for Franklin
Most washer calls in Franklin come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Indiana, you can check a license with the Indiana Professional Licensing Agency License Verification or report a problem to the Indiana Attorney General Consumer Protection Division.
Hiring a Washer Repair Company in Franklin
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Franklin, IN
What should I do about a Electrolux error code?
Should I repair or replace my Electrolux washer?
Which Franklin technicians work on Electrolux?
Related Repair Pages for Franklin
Electrolux Washer Repair Near Franklin
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.