Electrolux owners in Johnston usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Johnston
We found 26 appliance repair companies within 30 miles of Johnston. The rest are spread across Des Moines (11), Urbandale (5), and Ankeny (2). The farthest listed company is about 29 miles out. None of the repair companies near Johnston name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Greens Appliance, Heating & Cooling, around 3.4 miles out. Rated companies nearby average 4.5 stars across 25 businesses.
Companies are shown by relevance and distance from Johnston. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Electrolux | 0 |
|---|---|
| Repair companies inside 30 miles | 26 |
| Listing Saturday hours | 20 |
| Distance to the three closest (mi) | 3.4, 3.5, 3.7 |
| Mention washer work | 6 |
| With 4.5+ stars and at least 10 reviews | 4 |
Closest matches for Johnston: Greens Appliance, Heating & Cooling (3.4 miles away, based in Grimes, 4.9 stars from 4,448 reviews, lists Saturday hours); Westside Appliance Repair (4.9 miles away, based in Urbandale, 4.6 stars from 774 reviews); Hometown Hero Appliance Repair (4.3 miles away, based in Urbandale, 4.9 stars from 889 reviews); Sears Appliance Repair (3.7 miles away, based in Des Moines, 4.2 stars from 62 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
How Electrolux Washers Are Built
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
Electrolux Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- An error code on the display
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Johnston Washer Call
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Johnston
Most washer calls in Johnston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Before You Book in Johnston
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Johnston, IA
Why does my front-load washer smell?
Do you work for Electrolux?
What should I do about a Electrolux error code?
Other Washer Repair in Johnston
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.