Electrolux owners in Clinton usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Clinton, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Clinton
Our data shows 35 appliance repair companies inside a 30-mile radius of Clinton. 2 of them are based in Clinton itself, and the rest are spread across Davenport (18), Bettendorf (3), and Moline (3). No company within 90 miles of Clinton mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 2.1 miles out. Across 32 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Clinton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Electrolux | 0 |
|---|---|
| Three nearest companies, miles away | 2.1, 2.7, 11.3 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Name washers or washing machines in their listing | 3 |
| Repair companies inside 30 miles | 35 |
| Open on Saturdays (per listing) | 31 |
First up for Clinton: TMI - Total Maintenance, Inc. Heating, Air Conditioning, Plumbing (26.3 miles away, based in Bettendorf, 4.9 stars from 3,304 reviews, lists Saturday hours); Sears Appliance Repair (27.2 miles away, based in Moline, 4.0 stars from 205 reviews, lists Saturday hours); Beacon Appliance Repair Solutions (2.7 miles away, 5.0 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (2.1 miles away, 3.5 stars from 24 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
When to Call for Electrolux Washer Repair
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Clinton
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around Clinton
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Questions to Ask a Clinton Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Clinton, IA
What stops a washer from spinning?
Which Clinton technicians work on Electrolux?
Why is my washer leaking?
Should I repair or replace my Electrolux washer?
Other Washer Repair in Clinton
Electrolux Washer Repair Near Clinton
Electrolux Washer Repair for Towns Near Clinton
Electrolux washer repair for DeWitt and Maquoketa is handled by the same companies listed for Clinton. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.