Most Electrolux washer repairs in Bettendorf involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Bettendorf, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Bettendorf
Within 30 miles of Bettendorf there are 39 appliance repair companies in our data. 3 of them are based in Bettendorf itself, and other nearby bases include Davenport (20), Moline (4), and Clinton (2). The farthest listed company is about 28 miles out. Harmony Appliance Repair Specialists is the nearest, roughly 0.6 miles from Bettendorf. None of the repair companies near Bettendorf name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 36 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Bettendorf. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Electrolux | 0 |
|---|---|
| Name washers or washing machines in their listing | 4 |
| Open on Saturdays (per listing) | 33 |
| Distance to the three closest (mi) | 0.6, 0.7, 2.7 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Companies within 30 miles | 39 |
First up for Bettendorf: GARY POND APPLIANCE REPAIR AND COIN LAUNDRY SERVICE LLC. (9.0 miles away, based in Milan, 4.8 stars from 118 reviews); TMI - Total Maintenance, Inc. Heating, Air Conditioning, Plumbing (3.6 miles away, 4.9 stars from 3,304 reviews, lists Saturday hours); Sears Appliance Repair (5.4 miles away, based in Moline, 4.0 stars from 205 reviews, lists Saturday hours); Sears Appliance Repair (5.1 miles away, based in Davenport, 3.8 stars from 143 reviews, lists Saturday hours).
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
- An error code on the display
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Bettendorf
Most washer calls in Bettendorf come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Before You Book in Bettendorf
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
Electrolux Washer Repair FAQs: Bettendorf, IA
Should I repair or replace my Electrolux washer?
Why does my Electrolux washer show an error code?
Do you work for Electrolux?
How do I find a technician who knows Electrolux washers?
Other Washer Repair in Bettendorf
Electrolux Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.