If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Electrolux Washer Repair Near Kennesaw
40 repair companies serve Kennesaw from within 30 miles. 5 of them are based in Kennesaw itself, and the rest are spread across Woodstock (12), Marietta (12), and Smyrna (4). The farthest listed company is about 13 miles out. None of the repair companies near Kennesaw name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Local Appliance Repair Service Kennesaw is the nearest, roughly 0.1 miles from Kennesaw. Across 31 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 10 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 20 |
| Mention Electrolux | 0 |
| Listing Saturday hours | 36 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.1, 2.2, 3.1 |
The leading options for Kennesaw are Mr. Fixer Appliance Repair (2.2 miles away, 4.7 stars from 385 reviews, lists Saturday hours); Sears Appliance Repair (3.1 miles away, 4.5 stars from 274 reviews, lists Saturday hours); Top Notch Appliance Repair & Service, LLC (6.5 miles away, based in Woodstock, 5.0 stars from 1,885 reviews); The Appliance Doctor (8.4 miles away, based in Marietta, 4.8 stars from 2,153 reviews).
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
When to Call for Electrolux Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Laundry Notes for Kennesaw, GA
Most washer calls in Kennesaw come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Before You Book in Kennesaw
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Kennesaw, GA
Where is the water under my washer coming from?
How do I find a technician who knows Electrolux washers?
Do you work for Electrolux?
Other Washer Repair in Kennesaw
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.