Electrolux owners in Glendale usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Glendale, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Washers Near Glendale
Our data shows 40 appliance repair companies inside a 30-mile radius of Glendale. 34 list an address in Glendale, and the rest are spread across La Cañada Flintridge (3), Montrose (1), and La Crescenta-Montrose (1). None of the repair companies near Glendale name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Bender Appliance Repair, about 1.6 miles away. Across 31 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Glendale. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 51 |
|---|---|
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 24 |
| Mention washer work | 11 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 1.6, 1.7, 1.7 |
Closest matches for Glendale: A&Y Appliances (2.4 miles away, 4.9 stars from 512 reviews, lists Saturday hours); Top Tech Appliance Repair (1.7 miles away, 4.7 stars from 110 reviews); G and R Appliance Repair LLC (2.8 miles away, 4.9 stars from 94 reviews, lists Saturday hours); Mega Pro Appliance Repair (2.4 miles away, 4.5 stars from 191 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Glendale Washer Call
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Local Notes for Glendale
Most washer calls in Glendale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Before You Book in Glendale
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Glendale, CA
Do you work for Electrolux?
Why does my Electrolux washer show an error code?
Should I repair or replace my Electrolux washer?
Why does my front-load washer smell?
Other Washer Repair in Glendale
Electrolux Washer Repair in Nearby Cities
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Glendale technician bring the right parts.