If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Alameda
We found 40 appliance repair companies within 30 miles of Alameda. 4 list an address in Alameda, and the rest are spread across Oakland (32), Piedmont (2), and Emeryville (2). The farthest listed company is about 6 miles out. Nearest on the list: SKS Appliance Repair, around 0.8 miles out. None of the repair companies near Alameda name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 27 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 8 |
|---|---|
| Listing Saturday hours | 35 |
| Three nearest companies, miles away | 0.8, 0.9, 1.6 |
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Repair companies inside 30 miles | 60 |
First up for Alameda: Kerenza Appliance Repair (4.3 miles away, based in Oakland, 4.7 stars from 795 reviews); Urban Appliance Repair LLC (4.3 miles away, based in Emeryville, 5.0 stars from 54 reviews, lists Saturday hours); General Refrigeration Services Co (2.7 miles away, based in Oakland, 5.0 stars from 45 reviews); American Service Alliance (4.4 miles away, based in Oakland, 4.9 stars from 84 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Common Electrolux Washer Problems
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- An error code on the display
Inside a Washer Repair Visit
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Alameda
Most washer calls in Alameda come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
How to Choose a Washing Machine Technician Near Alameda
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Alameda, CA
Where is the water under my washer coming from?
Why does my front-load washer smell?
What stops a washer from spinning?
Do you work for Electrolux?
Related Repair Pages for Alameda
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.